Today, we have shipped  another sliding H frame servo hydraulic press， It is an order from England  customer, A 400 ton sliding H frame servo hydraulic press . This is customer-specific customized, non-standard customized The machine is used for stamping and forming metal parts. The accuracy of this machine is 8-sided guide rails with a large table size of 0.02mm and the speed can be adjusted with an automatic oiling system with  servo system. It is already in the production process, and delivery is about  a month away. This machine has advantages: 1. Can avoid the oil leakage. Because using Servo motor, the oil temperature can be lower. 2. English and customer country local language, bilingual operation interface, easy to operate. 3.Can save 50% - 70% electricity energy. 4.Parameters and Speed can be adjusted on the touch screen, easy to operate.(Machine without servo system, speed can not been adjusted.) 5.Can be 3 to 5 years longer service life than the common machine. it means,if common machine can service for 10 years, then machine with servo, can use 15 years. 6.Ensure safety and easy to know error,easy to do after service. Because of Automatic alarm and auto troubleshooting system. 7.Very easy to change mold, shorter time of changing mold. Because it have memory function,if use the original mold, do not need to adjust parameter again, 8.Very quiet , do not have noise. 9.Much stable than common machine. 10.Much high precision than common machine.      You are in the market for hydraulic press,do not hesitate to contact us,  Your feedback is the greatest support to us.