|Master Cylinder Nominal Force||kN||3000||5000||8000||10000|
|Max.Stroke of Ram||mm||400||400||500||500|
|Daylight (Max.Open Height)||mm||700||750||900||1200|
|Upper Ejection Cylinder Force||Ton||100||150||150||150|
|Stroke of Upper Ejection Cylinder||mm||50||50||50||50|
|Lower Ejection Cylinder Force||Ton||100||150||150||150|
|Stroke of lower Ejection Cylinder||mm||100||100||100||100|
|Upper Cushion Cylinder Force||Ton||100||100||200||200|
|Stroke of Upper Cushion Cylinder||mm||50||50||50||50|
|Lower Cushion Cylinder Force||Ton||100||100||200||200|
|Stroke of lower Cushion Cylinder||mm||50||50||50||50|
|Speed of Ram||Down No Load||mm/s||260||250||200||200|
|Effective Area of Working Table||RL(Inside Column)||mm||550||750||850||1050|
|Servo Motor Power||kW||16.4||24.5||31||49.6|
1、The blanking speed, the pressure as well as stroke can all be adjusted on the touch screen due to the adoption of servo system high precision technology.
2、Able to control feeding and discharging automatically .
3、Able to provide manipulator(robot arm)so that can realize convenient exchange of the molds.
4、Overall welded frame structure guarantees the lightness and stability of the fine blanking machine.
Advantages of our machine:
l With Servo system
YIHUI Hydraulic press with servo system,can bring you 10 kinds Advantages as below:
1. Can avoid the oil leakage. Because using Servo motor, the oil temperature can be lower.
2. English and customer country local language, bilingual operation interface, easy to operate.
3.Can save 50% – 70% electricity energy.
4.Parameters and Speed can be adjusted on the touch screen, easy to operate.(Machine without servo system, speed can not been adjusted.)
5.Can be 3 to 5 years longer service life than the common machine.
it means,if common machine can service for 10 years, then machine with servo, can use 15 years.
6.Ensure safety and easy to know error,easy to do after service. Because of Automatic alarm and auto troubleshooting system.
7.Very easy to change mold, shorter time of changing mold.
Because it have memory function,if use the original mold, do not need to adjust parameter again,
8.Very quiet , do not have noise.
9.Much stable than common machine.
10.Much high precision than common machine.
l We could supply not only custom machine,molds,robot arm(manipulator),auto feeder process technology, and other relative machines but also a full production line service.
l The main components are imported from Japan and Taiwan . So the quality is near the Japan production, but the unit price is lower than Japan production.
l Our factory have specialized in independent development and producing hydraulic press for over 20 years. So the product is stable and high quality.
l Machine body, we use bending structure , much stronger than the common welding structure .
l Oil pipe, we use Clip-on structure , much tight than common welding structure. Prevent oil leakage.
l We take integrated oil manifold block, much easier to check machine and repair machine.
All of the hydraulic presses in our factory have passed CE,ISO,SGS,BV certificates.